HIKVISION DS-2TD6237-50H4L/W - Set Exception Alarm; Set Burning-Prevention; Detect Audio Exception

6.4 Set Excepon Alarm
Excepon such as network disconnecon can trigger the device to take corresponding acon.
Steps
1. Go to
Conguraon → Event → Basic Event → Excepon .
2. Select
Excepon Type.
HDD Full The HDD storage is full.
HDD Error Error occurs in HDD.
Network Disconnected The device is oine.
IP Address Conicted The IP address of current device is same as that of other device in
the network.
Illegal Login Incorrect user name or password is entered.
Voltage Instable The power supply voltage is uctuang.
3. Refer to Linkage Method Sengs for seng linkage method.
4. Click Save.
6.5 Set
Burning-Prevenon
This funcon is used to close the shuer to prevent the lens from high temperature damage.
Steps
1. Go to Conguraon → Event → Basic Event → Burning-Prevenon .
2. Check Enable.
3. Select
burning-prevenon mode.
Lens Movement
The lens move automacally to avoid high temperature damage.
4. Set the protecon duraon.
5. Click Save.
6.6 Detect Audio
Excepon
Audio excepon detecon funcon detects the abnormal sound in the surveillance scene, such as
the sudden increase/decrease of the sound intensity, and some certain acons can be taken as
response.
Steps
1. Go to
Conguraon → Event → Smart Event → Audio Excepon Detecon .
2. Select one or several audio excepon detecon types.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
30