HIKVISION DS-2TD6237-50H4L/W - White Balance; Dnr; Eis; Defog

10.4.12 White Balance
White balance is the white rendion funcon of the camera. It is used to adjust the color
temperature according to the environment.
10.4.13 DNR
Digital Noise Reducon is used to reduce the image noise and improve the image quality. Normal
and Expert modes are selectable.
Normal
Set the DNR level to control the noise reducon degree. The higher level means stronger
reducon degree.
Expert
Set the DNR level for both space DNR and me DNR to control the noise reducon degree. The
higher level means stronger reducon degree.
10.4.14 EIS
Increase the stability of video image by using jier compensaon technology.
10.4.15 Defog
You can enable the defog funcon when the environment is foggy and the image is misty. It
enhances the subtle details so that the image appears clearer.
10.4.16 Set
Palee
You can select the palee mode to display the thermal grayscale image to colored image.
Steps
1. Go to Conguraon → Image → Display Sengs .
2. Select the thermal channel.
3. Select a
palee mode in Image Enhancement according to your need.
Result
The live view displays the image with palee.
10.4.17 Set Target Enhancement
You can set the color of the targets in dierent temperature ranges to idenfy the target quickly.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
64