HIKVISION DS-2TD6237-50H4L/W - Set Palette Range; Brightness Sudden Change; Dde

Steps
1. Go to
Conguraon → Image → Display Sengs .
2. Select the thermal channel.
3. Click Image Enhancement, select
Palee as White Hot or Black Hot.
4.
Set the temperature value and color of High Temperature, Interval Temperature, or Low
Temperature targets.
Above (be colored)
When the target of high temperature needs to be colored, you can set the high temperature
color. Target above the seng temperature will be displayed in seng color.
Between (be colored)
When the target of an interval temperature needs to be colored, you can set the interval
temperature color. Target between the minimum and the maximum temperatures will be
displayed in
seng color.
Below (be colored)
When the target of low temperature needs to be colored, you can set the low temperature
color. Target below the seng temperature will be displayed in seng color.
5. Click Save.
10.4.18 Set
Palee Range
The live view can display the palees eect of the specied temperature range.
Select Manual or Auto from By Temp. Range drop down list.
Auto
The device detects the max. temperature and min. temperature of the scene automacally and
display image of the whole scene with
palees.
Manual
In this mode, you can enter the temperature upper limit and lower limit manually. And the live
view shows the
palees eect of the desired temperature secon more detailed.
10.4.19 Brightness Sudden Change
When the brightness of target and the background is hugely dierent (the temperature dierence
of target and background is huge), the system reduces the dierence for viewing.
10.4.20 DDE
Digital Detail Enhancement is used to adjust the details of the image. OFF and Normal modes are
selectable.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
65