HIKVISION DS-2TD6237-50H4L/W - Scene Mode; Image Adjustment; Image Adjustment (Thermal Channel)

For device that supports mulple channels, display sengs of each channel is required. The
sengs for dierent channels may be dierent. This part introduces all possible parameters among
the channels.
Click Default to restore
sengs.
10.4.1 Scene Mode
There are several sets of image parameters predened for dierent installaon environments.
Select a scene according to the actual installaon environment to speed up the display sengs.
10.4.2 Image Adjustment
By adjusng the Brightness, Saturaon, Contrast and Sharpness, the image can be best displayed.
10.4.3 Image Adjustment (Thermal Channel)
You can opmize the image display eect of thermal channel by seng background correcon and
manual correcon.
Background Correcon
Fully cover the lens with an object of uniform temperature in front of the lens, such as foam
board or paperboard. When you click Correct, the device will take the uniform object as the
standard and opmize the image once.
Manual Correcon
Click Correct to opmize the image once.
Note
It is a normal phenomenon that short video freezing might occur during the process of Background
Correcon and Manual Correcon.
Thermal AGC Mode
Choose the AGC mode according to dierent scenes to balance and improve the image quality.
• Histogram: Choose for scene with obvious WDR and high temperature dierence, can
improve image contrast and enhance image. E.g. the scene contains both indoor and outdoor
scenes.
• Linear: Choose for scene with low temperature
dierence and the target is not obvious, can
improve image contrast and enhance image. E.g. the bird in forest.
•
Self-Adapve: Choose AGC mode automacally according to current scene.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
60