HIKVISION DS-2TD6237-50H4L/W - View Previous;Next Page; Full Screen; Conduct Regional Focus; Light

9.1.5 View Previous/Next Page
When the number of channels surpasses that of live view window division, this funcon can switch
live view among
mulple channels.
Click to switch live view among mulple channels.
9.1.6 Full Screen
This funcon is used to view the image in full screen mode.
Click to start full screen mode and press ESC buon to exit.
9.1.7 Conduct Regional Focus
You can enable the funcon to focus on certain area.
Steps
1. Click to enable regional focus.
2. Drag the mouse on the live view to draw a rectangle as the desired focus area.
3. Click
to disable this funcon.
9.1.8 Light
Click to turn on or turn o the illuminator.
9.1.9 Operate Wiper
For the device that has a wiper, you can control the wiper via web browser.
Steps
1. Go to wiper seng page: Conguraon → PTZ → Wiper .
2. Select a wiper mode.
One
Time
The wiper wipes one me when you click on live view page.
Cycle The wiper works on schedule at set wiping interval. Click on live view to start
wiping.
Duraon
The schedule in which the wiper is ready to work.
Interval
The interval between two secessive wiping acons.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
49