HIKVISION DS-2TD6237-50H4L/W - Lens Initialization; Track Manually; Auxiliary Focus; Quick Set Live View

Auto
Note
Auto mode is only available for device that supports rain-sensing auto wiper.
In auto mode, the wiper works when rain drops on the window.
9.1.10 Lens Inializaon
Lens inializaon is used on the device equipped with motorized lens. The funcon can reset lens
when long me zoom or focus results in blurred image. This funcon varies according to dierent
models.
Manual Lens
Inializaon
Click to operate lens inializaon.
Auto Lens Inializaon
Go to Conguraon → System → Maintenance → Lens Correcon to enable this funcon. You
can set the arming schedule, and the device will correct lens automacally during the
congured me periods.
9.1.11 Track Manually
In live view, manually select a target for the device to track.
Note
The funcon may not be supported by certain device models.
Steps
1. Click on the toolbar of the live view page.
2. Click a moving object in the live image.
The device tracks the target and keeps it in the center of live view image.
9.1.12 Auxiliary Focus
Click to realize automac focus. This funcon is subject to the actual device model.
9.1.13 Quick Set Live View
It
oers a quick setup of PTZ, display sengs, OSD, video/audio and VCA resource sengs on live
view page.
Steps
1. Click to show quick setup page.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
50