HIKVISION DS-2TD6237-50H4L/W - Chapter 5 Behavior Analysis; Flow Chart of Behavior Analysis; Set VCA Parameters

Chapter 5 Behavior Analysis
The behavior analysis funcon is used to detect whether there is any target break the VCA rules.
The
opcal camera will track the target or the device will alarm when the VCA rule is triggered.
5.1 Flow Chart of Behavior Analysis
The process of
conguring the behavior analysis funcon is described below.
Figure 5-1 Flow Chart of Behavior Analysis Conguraon
5.2 Set VCA Parameters
Steps
1. Go to
Conguraon → Local .
Rules
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
20