HIKVISION DS-2TD6237-50H4L/W - Recommended Scene; Detection Mode and Application Scene

Note
Please refer to the Quick Start Guide for detail informaon of Installaon part in the ow chart.
Obtain the informaon of longitude, altude, direcon and so on by device aer installaon.
4.2 Recommended Scene
This part introduces the recommended scenes of re source detecon and helps you select the
appropriate scene.
Fire source
detecon can be applied to indoor and outdoor monitoring with a maximum detecon
radius 15 km. To achieve the best monitoring eect, please set the installaon place as
requirements below.
• The
installaon place should be the highest posion within the detecon area. The lens should
not be covered during movement to detect the maximum area.
• It is
beer to choose the installaon place with convenient trac, well-equipped power and
internet facilies. E.g. communicaon tower, watchtower, high-rise roof and so on.
4.3
Detecon Mode and Applicaon Scene
Fire and Smoke Detecon Mode
Fire or Smoke
The system alarms when device is either triggered by re source detecon or smoke detecon.
Fire and Smoke
The system holds when device is triggered by
re source detecon or smoke detecon. When
target is detected by both rules, the system sends two alarms, otherwise, the system sends
single alarm.
Double Conrm
The system alarms when device is both triggered by re source detecon and smoke detecon.
Specied Fire Source
The system alarms when device is triggered by re source detecon.
Specied Smoke
The system alarms when device is triggered by smoke.
Applicaon Scene
In Applicaon Scene, Short Distance and Long Distance are selectable. Select the scene according
to the actual monitoring distance.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
14