HIKVISION DS-2TD6237-50H4L/W - Expert Mode

Figure 6-1 Set Rules
Stop Drawing Stop drawing one area.
Clear All Clear all the areas.
4. Oponal: You can set the parameters of mulple areas by repeang the above steps.
6.1.2 Expert Mode
You can congure the moon detecon parameters of day/night switch according to the actual
needs.
Steps
1. Select expert mode in Conguraon.
2. Set parameters of expert mode.
Day/Night Switch
OFF: Day/Night switch is disabled.
Day/Night Auto-Switch: The system switches day/night mode
automacally according to
environment. It displays colored image at day and black and white image at night.
Day/Night Scheduled-Switch: The system switches day/night mode according to the
schedule. It switches to day mode during the set periods and switches to night mode during
the other periods.
Note
This funcon is not supported in the expert mode of thermal channel.
Sensivity
The higher the value of sensivity is, the more sensive the moon detecon is. If the
sensivity is set to 0, moon detecon and dynamic analysis do not take eect.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
27