HIKVISION DS-2TD6237-50H4L/W - Set Park Action; Set Combined Path

6. Set Park Time. During the set task period, if you operate the device manually, the scheduled
task will be suspended. When the manual
operaon is over, the device will connue to perform
the scheduled task aer the set park me.
Note
Up to 30 me periods can be congured per day.
7. Click Save.
Note
If you want to clear all scheduled tasks, go to Conguraon → PTZ → Clear Cong , check Clear
All Scheduled Tasks, and click Save.
8.9 Set Park Acon
You can set the device to perform an acon (for example, preset or patrol) or return to a posion
aer a period of inacvity (park me).
Before You Start
Set the acon type rst. For example, if you want to select patrol as park acon, you should set the
patrol. See Set Patrol Scan for details.
Steps
1. Go to
Conguraon → PTZ → Park Acon .
2. Check Enable Park Acon.
3. Set Park Time: the
inacve me before the device starts park acon.
4. Select Acon Type according to your needs.
Note
The VCA Type varies according to dierent acon types.
5. Select an Acon Type ID, if you select patrol or preset as acon type.
When the
acon type is patrol, acon type ID stands for patrol No. When the acon type is
preset, acon type ID stands for preset No.
6. Click Save.
8.10 Set Combined Path
It oers the opon to add mulple types of VCA scanning tasks to one combinaon path. Seng
the combined path as a scheduled task or a park acon is convenient to manage mulple VCA
funcons in dierent circumstances.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
43