HIKVISION DS-2TD6237-50H4L/W - Set Alarm Input

Figure 6-3 Set Video Tampering Area
6. Refer to Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for
seng linkage method.
7. Click Save.
6.3 Set Alarm Input
Alarm signal from the external device triggers the corresponding acons of the current device.
Before You Start
Make sure the external alarm device is connected. See Quick Start Guide for cable connecon.
Steps
1. Go to Conguraon → Event → Basic Event → Alarm Input .
2. Check Enable Alarm Input Handling.
3. Select Alarm Input NO. and Alarm Type from the dropdown list. Edit the Alarm Name.
4. Refer to Set Arming Schedule for
seng scheduled me. Refer to Linkage Method Sengs for
seng linkage method.
5. Click Copy to... to copy the sengs to other alarm input channels.
6. Click Save.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
29