HIKVISION DS-2TD6237-50H4L/W - Chapter 11 Video Recording and Picture Capture; Storage Settings; Set Memory Card; Set NAS

Chapter 11 Video Recording and Picture Capture
This part introduces the operaons of capturing video clips and snapshots, playback, and
downloading captured
les.
11.1 Storage Sengs
This part introduces the conguraon of several common storage paths.
11.1.1 Set Memory Card
If you choose to store the les to memory card, make sure you insert and format the memory card
in advance.
Before You Start
Insert the memory card to the camera. For detailed installaon, refer to Quick Start Guide of the
camera.
Steps
1. Go to storage management
seng page: Conguraon → Storage → Storage Management →
HDD Management .
2. Select the memory card, and click Format to start
inializing the memory card.
The Status of memory card turns to Normal from Uninialized, which means the memory card
can be used normally.
3.
Oponal: Dene the Quota of the memory card. Input the quota percentage for dierent
contents according to your need.
4. Click Save.
11.1.2 Set NAS
Take network server as network disk to store the record les, captured images, etc.
Before You Start
Get the IP address of the network disk
rst.
Steps
1. Go to NAS
seng page: Conguraon → Storage → Storage Management → Net HDD .
2. Click HDD No.. Enter the server address and le path for the disk.
Server Address
The IP address of the network disk.
File Path
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
69