Hioki 3554 - Chapter 5 Memory Feature

Industrial Batteries & Energy Storage
1300 734 253
sales@regalelectro.com.au
www.regalelectro.com.au
Memory Feature
Details of Operation
While the measured values are being held, press the MEMO key to save
them to the instrument’s internal memory.
When the auto-memory feature is on, measured values will be saved to
the instrument’s internal memory when held.
Saved data can be deleted.
Data Saved
Date and time, resistance, voltage, temperature, comparator
permissible values, results of judgement.
Number of Data Sets
the can be Saved
4800
Memory Structure
400 data sets/unit (12 units)
Unit Names
A b C d E F G H J L n P
Reading Data
Conducted suing the keys on the instrument or the PC application
Deleting Data
Available (single data sets, single units, or all data)
Backup
Saved to internal EEPROM (non-volatile memory)
Auto-Hold Feature
Details of Operation
Holds measured values automatically when stabilised.
Releasing the Hold
1. Pressing the HOLD key.
2. Inputting signals to the EXT.HOLD/MEMO terminal
Initial Status
OFF
Auto-Memory Feature
Details of Operation
Saves measured value data automatically when held.
Saved data can be cancelled by pressing the CLEAR key.
Initial Status
OFF
Auto-Power-Save Feature (Power on Option)
Details of Operation
Cuts off power to the instrument automatically when it has not been
used for ten minutes or longer and detection of constant-current
irregularities has continued for ten minutes or longer.