86
Saving Data in the Memory
5
Save measured values.
The instrument will assign
the chosen number to the
measured values and save
them.
After the data has been saved,
the subsequent available
memory number will appear.
The hold function will be
disabled.
• Holding down the CLEAR key for at least 1 s can delete the
data saved most recently. However, you can delete immediately
after the data has been saved only.
Every time you hold down the key for at least 1 s, the
instrument will delete the data that is the latest at the time and
return the display to the rst memory number in the unit to
display the contents.
• While the measurement recording prompt is operating, the
instrument will return the memory number corresponding to the
rst battery number to display the contents.
HIOKI BT3554F961-00HIOKI BT3554F961-00
To Next Page
Loading...
