58
Using the Hold Function
Freezing measured values using the 9466 Remote
Control Switch
Model 9466
Remote Control Switch
The 9466 Remote Control Switch
(option) is available for the operation
in the same way as when using the
HOLD key.
1
Disconnect the test lead
from the battery under
measurement.
Top of the
instrument
NO
2
Insert the mini-plug of the 9466
Remote Control Switch into the
EXT.HOLD terminal.
3
Connect the connectors of the
test lead to the instrument.
(Black) (Red)
4
Press the PRESS button on the
9466 Remote Control Switch.
The instrument will freeze
measured values.
Disabling the hold function
Press the PRESS button on the 9466 Remote Control Switch or the
HOLD key on the instrument.
HIOKI BT3554F961-00HIOKI BT3554F961-00
To Next Page
Loading...
