Hioki BT3554-51 - Preparing for Measurement; Installing;Replacing LR6 Alkaline Batteries

37
2
Preparing for Measurement
2.1 Installing/Replacing LR6 Alkaline
Batteries
When using the instrument for the rst time, insert eight LR6
Alkaline batteries. Before attempting measurement, check the
instrument’s battery level. If the instrument’s batteries are running
low, replace the LR6 Alkaline batteries with fresh ones.
When the segment blinks, which indicates that the
instrument’s batteries are running low, replace them as soon as
possible.
1
Turn o󰀨 the instrument and
remove the test lead.
1
2
Remove the battery cover on
the rear of the instrument.
2
3
4
3
Ensure correct polarity and
insert eight LR6 Alkaline
batteries.
4
Install the battery cover.
The batteries can continuously
provide power to the instrument
with the Z3210 not installed for
about 8.3 hours (with the Z3210
installed for communications,
about 8.2 hours).
2 Preparing for Measurement
HIOKI BT3554F961-00HIOKI BT3554F961-00