Hioki BT3554-51 - Deleting Measured Data; Communicating With a Mobile Device

92
Deleting Measured Data
5.6 Deleting Measured Data
IMPORTANT
• Use of the CLEAR key of the instrument can delete measured
data only.
Prole information cannot be deleted.
• Use GENNECT ONE or GENNECT Cross to delete prole
information.
Deleting a single measured data set
1
Switch over the display to
memory readout mode.
2
Choose a memory number to
delete.
The instrument will display the
measurement values to which
the memory number you chose
has been assigned.
3
Press the key once.
After 3 s of inactivity, the display
will return to memory readout
mode.
4
Conrm your entry.
The data set with the memory
number you chose will be
deleted.
HIOKI BT3554F961-00HIOKI BT3554F961-00