Hioki BT3554-51 - Enabling the Comparator Function

68
Enabling the Comparator Function
4.2 Enabling the Comparator Function
1
Press the key.
A blinking comparator number
will appear.
Press the COMP key again to
return to normal measurement
mode.
2
Choose a comparator
number.
You can choose a number from
between 1 and 200.
3
Conrm your entry.
The comparator function will be
enabled.
When the comparator function is enabled, the measurement
range will switch over to that specied in the comparator setting
with the chosen number.
HIOKI BT3554F961-00HIOKI BT3554F961-00