Hioki BT3554-51 - Maintenance and Service; Repair, Inspection, and Cleaning

125
FunctionSpecications
9.4 Function Specications
(1) Measurement-current anomaly detection
Operation Detects measurement-current anomalies.
Display The [----] segments appear (For resistance and voltage
readouts).
Default setting Enabled (Cannot be disabled)
(2) Wire break detection
Operation Detects a broken source-side cable and a blown fuse.
Detects a broken sense-side cable
Display Function enabled:
The [----] segments appear (For resistance and
voltage readouts).
Function disabled:
The [----] segments appear (For resistance
readout).
A measured value appears (For voltage readout).
Default setting Enabled
How to disable See “1.4 Names and Functions of Parts” (p. 28).
(3) Warning display
Operation Informs the user that the input exceeds the measurable
range of the present range setting.
Display The [OVER] segment and the range’s maximum display
value blink (For resistance and voltage readouts).
Backlights the display in red, produces beeps (When
the input voltage exceeds the maximum value).
Default setting Enabled (Cannot be disabled)
HIOKI BT3554F961-00HIOKI BT3554F961-00