39
Connecting the Z3210 Wireless Adapter (Option)
2.3 Connecting the Z3210 Wireless
Adapter (Option)
Installing the Z3210 Wireless Adapter (option) in the instrument lets
you use the wireless communications function.
See “7.2 Communicating With a Mobile Device” (p. 106).
WARNING
Turn o the instrument and remove the test lead.
Failure to do so could cause an electric shock.
CAUTION
After touching any metallic part, such as a doorknob,
to eliminate static electricity from your body, connect/
disconnect the Z3210.
Failure to do so could cause static electricity to damage
the Z3210.
1
Turn o the instrument and
remove the test lead.
2
2
3
4
2
Remove the Z5041 Protector
while pressing down it as
shown.
3
Remove the protective cap with
a athead screw driver.
4
Insert the Z3210, observing the
correct orientation, as far as it
will go.
5
Attach the Protector.
• Store the removed protective cap.
• When removing the Z3210, install the protective cap.
HIOKI BT3554F961-00HIOKI BT3554F961-00
To Next Page
Loading...
