38
Attaching the Z5041 Protector
2.2 Attaching the Z5041 Protector
If the Z5041 Protector has been removed from the instrument,
attach it by following the instruction below.
1
Turn o the instrument and
remove the test lead.
2
Insert the instrument into the
Z5041 Protector.
Observe the proper orientation.
NO
OK
3
Push the instrument into the
Protector in the direction of the
arrow.
(Completed)
HIOKI BT3554F961-00HIOKI BT3554F961-00
To Next Page
Loading...
