Hioki BT3554-51 - Comparator Function (Evaluation Based on Threshold Values); Overview of Comparator Function

67
4
Comparator Function
(Evaluation Based on
Threshold Values)
4.1 Overview
The comparator function compares measured values of batteries
with the preset threshold values to evaluate batteries on a three-
level basis consisting of PASS, WARNING, and FAIL.
Comparator threshold values
Set the resistance warning threshold, resistance rejection value,
and voltage warning threshold. Up to 200 comparison conditions
can be set.
For information about how to set the thresholds, see “1.1 Evaluating
Battery Deterioration” (p. 21).
Comparator buzzer
The instrument with the default settings will produce beeps when
the comparator yields the WARNING or FAIL result.
See “4.4 Setting the Comparator Buzzer” (p. 78).
FAIL
Rejection
value
Initial
value
Initial value
Warning
threshold
Voltage
Resistance
PASS
FAIL
WARNING
Warning
threshold
4 Comparator Function (Evaluation Based on Threshold Values)
HIOKI BT3554F961-00HIOKI BT3554F961-00