Hioki BT3554-51 - Noise-Frequency Reduction Function

49
Noise-Frequency Reduction Function
3.3 Noise-Frequency Reduction
Function
Enabling the noise-frequency reduction function can reduce the
e󰀨ects of noise exhibited in measurement environments, resulting in
smaller variation in measured values. Resistance measured values
will become more stable.
(Noise reduction technology)
Noise-frequency reduction
function disabled
Noise-frequency reduction
function enabled
When the segment pops up:
The noise-frequency reduction function is enabled.
When the segment is blinking:
The noise frequencies are being avoided.
Disabling the noise-frequency reduction function
Cycling the instrument will disable the function.
• It may take longer to perform measurement with the noise-
frequency reduction function enabled.
This time, the instrument will blink the
segment.
• It may not be possible to avoid all noise depending on the noise
frequency.
HIOKI BT3554F961-00HIOKI BT3554F961-00