41
Connecting the Test Lead
Bundling up the Pin Type Lead and the 9466
Remote Control Switch
You can bundle up the Pin Type Lead (the 9465-10, 9772, L2020)
and the 9466 Remote Control Switch (option).
Attach the Remote Control Switch to the probe of the Pin Type
Lead. Bundle up the two cables using the spiral tubes.
Model L2020
(1) (2) (3) (4)
(4)(5)
Model 9465-10
(1) Model 9466 Remote Control Switch
(2) Probe
(3) Spiral tube (small)
Bundle up the cables at the center of the lead between the
probe and probe-side junction with the spiral tube.
(4) Junctions
(5) Spiral tubes (large)
Bundle up the cables between the junctions if you wish.
HIOKI BT3554F961-00HIOKI BT3554F961-00
To Next Page
Loading...
