95
6
Measurement Recording
Prompt Function
The instrument and your mobile device with GENNECT Cross
installed, using the display and voice prompts, respectively, can
inform you of comparison results and the battery number you are to
measure next. This enables you to record measured data quickly.
Install the latest version of GENNECT Cross. The voice prompt
function can be used under version 1.8 or later of GENNECT Cross.
Display
No. 1, pass.
Next battery, No. 2.
Voice prompt
IMPORTANT
Check that the instrument’s battery level remains suciently. If
the instrument is shut o while using the measurement recording
prompt, you cannot restart the prompt beginning from the number
where the prompt stopped.
6 Measurement Recording Prompt Function
HIOKI BT3554F961-00HIOKI BT3554F961-00
To Next Page
Loading...
