106
Communicating With a Mobile Device
7.2 Communicating With a Mobile
Device
Enabling the wireless communications function lets you use your
mobile device to do various works, such as browsing measured
data saved in the instrument, creating reports, and running the
measurement recording voice prompt.
For details, see User Manual on GENNECT Cross (free-of-charge
application).
1
Connect the Z3210 Wireless
Adapter (option) into the
instrument. (p. 39)
2
Install GENNECT Cross on
your mobile device.
3
Turn on the instrument.
4
Enable the wireless
communications function.
When the instrument is turned
on for the rst time after the
installation of the Z3210, the
wireless communications
function will be enabled.
Hold down for at least 1 s.
HIOKI BT3554F961-00HIOKI BT3554F961-00
To Next Page
Loading...
