Hioki BT3554-51 - Setting the Date and Time

43
Setting the Date and Time
2.6 Setting the Date and Time
The instrument can show the date and time. Conrm the date and
time settings when using the instrument for the rst time. The time
is displayed using a 24-hour clock. The instrument’s calendar can
automatically recognize leap years.
1
(Hold down for at least
1 s.)
Let the date and time
appear.
Holding down the key at
least 1 s again will hide the
date and time.
2
Enter the date and time (in
the yyyy/mm/dd hh:mm
format).
3
Conrm your entry.
Date and time will not be
set if you switch over the
display from the clock
setup mode without
pressing the ENTER key.
You can also set the date and time using GENNECT ONE
or GENNECT Cross.
HIOKI BT3554F961-00HIOKI BT3554F961-00