40
Connecting the Test Lead
2.4 Connecting the Test Lead
WARNING
To avoid an electric shock, be sure to connect the test
lead properly.
This section describes how to connect the test lead to the
instrument. Connect the test lead’s connectors to all four terminals:
the SOURCE terminals (positive and negative) and the SENSE
terminals (positive and negative).
(Red)
(Black)
Align the
marks
of the same color.
SENSE
SOURCE
(Red)(Black)
When using the 9460 Clip Type Lead with Temperature Sensor
(option), connect the mini plug to the TEMP.SENSOR terminal.
See “3.9 Measuring Temperature” (p. 66).
HIOKI BT3554F961-00HIOKI BT3554F961-00
To Next Page
Loading...
