Hioki BT3554-51 - Setting the Comparator Buzzer

78
Setting the Comparator Buzzer
4.4 Setting the Comparator Buzzer
This section describes how to set the instrument to produce beeps
according to the comparison result. The comparator buzzer can be
set in the following states: By default, the instrument has been set
to produce beeps when the comparator gives a WARNING result or
a FAIL judgment.
Disabled
The instrument will not produce beeps regardless of
comparison results.
Sounds for
PASS
The instrument will produce beeps when the comparator
gives a PASS judgment.
Sounds
for FAIL
judgments
The instrument will backlight the display in red and
produce beeps when the comparator gives a WARNING
result or a FAIL judgment.
When you press the key, the present comparator buzzer setting
will appear. Press the key repeatedly to cycle through the settings.
Disabled
Sounds for FAIL
Sounds for PASS
After a certain period of inactivity, the instrument will conrm your
entry and the display will return to measurement mode.
The key tone cannot be set.
HIOKI BT3554F961-00HIOKI BT3554F961-00