Hioki BT3554-51 - Basic Specifications

107
Communicating With a Mobile Device
5
Run GENNECT Cross on your
mobile communication device
and register the instrument to
pair with.
6
Select various functions to
perform measurement.
• The communication distance is about 10 m with a clear line of
sight. The communicatable distance may greatly vary depending
on the presence of an obstruction (walls or metallic shielding
object) and the distance between the oor (ground) and the
instrument. To ensure stable measurement, make sure that the
radio-wave intensity is su󰀩cient.
• GENNECT Cross is free of charge. However, the customer is
responsible for the cost to download the application software and
connect to the Internet when using the software
• GENNECT Cross may not properly operate depending on the
mobile device.
• For the rst time (before being paired with any instrument), the
app will launch with the paring setup screen.
• GENNECT Cross’s paring setup screen will automatically pair
with the instrument (up to eight instruments).
• Allow about 5 to 30 s for the instrument to pair with the app after
turning on. If the instrument fails to pair even if one minute has
elapsed, relaunch GENNECT Cross and cycle the instrument.
IMPORTANT
Placing the instrument on the oor or the ground will cause the
communications distance to decrease. To keep the instrument
away from the oor or the ground, it is recommended to place the
instrument on a desktop or a workbench or hang the instrument
from your neck using the neck strap.
HIOKI BT3554F961-00HIOKI BT3554F961-00