Hioki BT3554-51 - Page 140

126
FunctionSpecications
(4) Noise-frequency reduction
(Noise reduction technology)
Operation Avoids noise frequencies using the noise reduction
technology.
Display Function enabled:
The
segment appears.
During reduction of noise frequencies:
The
segment blinks.
Default setting Disabled
How to set See “3.3 Noise-Frequency Reduction Function”
(p. 49).
(5) Zero adjustment
Operation Internally adjusts the instrument so that it provides the
zero indications corresponding to the measured values
obtained through zero adjustment.
Display During zero adjustment:
The [0ADJ] segment blinks (While obtaining the
correction value).
Enabled:
The [0ADJ] segment appears (With the correction
value enabled).
Default setting Disabled
Correction range Up to 300 counts for each range of the resistance and
voltage values
How to correct See “3.4 Adjusting the Zero Point (Zero Adjustment)”
(p. 50).
HIOKI BT3554F961-00HIOKI BT3554F961-00