Hioki BT3554-51 - Troubleshooting Common Issues

127
FunctionSpecications
(6) Comparator
Operation Compares measurement values with set threshold
values and informs the user about the results.
Means of giving comparison results:
Displays results according to the following table
and produces beeps.
If the comparator yields a WARNING or FAIL judgment,
the display will be backlit in red in conjunction with
beeps.
(When the display is backlit in red, the white backlight
willbeturnedo󰀨.)
Resistance
(low)
Resistance
(medium)
Resistance
(high)
Voltage
(high)
PASS WARNING FAIL
Voltage (low) WARNING WARNING FAIL
Display When the comparator function enabled:
The [COMP] segment and the comparator number
appear. (
)
When the memory function is enabled, no comparator
number appears.
Default setting Disabled
How to set See “4.2 Enabling the Comparator Function” (p. 68)
and “4.3 Setting Threshold Values for the
Comparator” (p. 69).
Number of
settings to be
saved
200 tables
HIOKI BT3554F961-00HIOKI BT3554F961-00