Hioki BT3554-51 - Page 142

128
FunctionSpecications
(7) Comparator buzzer
Operation Produces beeps according to the comparison result.
Display The [
] and [COMP] segments appear.
Default setting Sounds for FAIL judgments
How to set See “4.4 Setting the Comparator Buzzer” (p. 78).
(8) Hold
Operation Freezes displayed values (Suspends refresh of
displayed values).
Disabled when the voltage readout exhibits the [----]
segments.
Display When the values freeze:
The [COMP] segment appears.
How to set See “3.5 Using the Hold Function” (p. 57).
(9) Automatic hold
Operation Automatically freezes the measured values once the
resistance value has been stabilized.
The values are not refreshed sequentially.
Display When the function is enabled:
The [AUTO HOLD] segment appears.
When the display is freezing:
The [HOLD] segment appears.
Default setting Disabled
How to set See “3.6 Automatic Hold Function” (p. 59).
HIOKI BT3554F961-00HIOKI BT3554F961-00