91
Reading Out Saved Data
• Hold down the key for at least 1 s to check the saved date
and time.
• The comparison result of the read-out data will be also
displayed.
• You cannot choose the memory numbers not containing any
data.
• If no data has been saved, the display will show the [−−−−]
segments and return to measurement mode.
• The memory numbers with the blinking [PROFILE] segment
indicates that the prole information has been registered there.
• Displayed data measured using the 9460 Clip Type Lead with
Temperature Sensor (option) 9451/9451S Temperature Probe
will include temperature.
HIOKI BT3554F961-00HIOKI BT3554F961-00
To Next Page
Loading...
