102
Visual Prompt and Voice Prompt
If you mistakenly measured wrong batteries
Holding down the CLEAR key for at least 1 s can
delete the data set saved most recently. Every time
you hold down the CLEAR key for at least 1 s, the
instrument will delete the data that is the latest at the
time. You can return the display to the rst battery
number.
To change the comparator function settings
during the measurement recording prompt
The settings cannot be changed. Stop the
measurement recording prompt and use the
instrument to set the comparator settings.
To disable the automatic hold function and
automatic memory function during the
measurement recording prompt
You can disable them using the instrument. To freeze
and save the measured values after disabling the
functions, use the keys.
To quit the measurement recording prompt
Hold down the GUIDE key for at least 1 s.
Alternatively, use GENNECT Cross to quit. However,
you cannot restart the prompt beginning from the
number where you quit.
HIOKI BT3554F961-00HIOKI BT3554F961-00
To Next Page
Loading...
