Hioki BT3554-51 - Replacing the Tip Pin of the Test Lead

134
FunctionSpecications
(19) Communicating via USB.
Operation Handles commands to communicate with computers.
System
requirements
Windows 8 or Windows 10
(During wireless communications, connecting the
instrument with the Z3210 installed to a computer via
the USB interface will automatically disable the wireless
communications)
How to
communicate
See “7.1 Communicating With a Computer” (p. 105).
(20) Wireless communications
(Only with the Z3210 installed)
Operation Transfers measured values to a smart phone or a tablet
to display.
When the
segment hides:
Wireless communications disabled
When the
segment appears:
Wireless communications enabled
When the
segment blinks:
Now communicating
Default setting Enabled(Whentheinstrumentisturnedonfortherst
time after the installation of the Z3210)
Communications
distance
Approx. 10 m (line of sight)
Supported
applications
GENNECT Cross for iOS
GENNECT Cross for Android
How to
communicate
See “7.2 Communicating With a Mobile Device”
(p. 106).
HIOKI BT3554F961-00HIOKI BT3554F961-00