16
Operating Precautions
IMPORTANT
• Do not place the test lead in contact with the measurement
terminals of a leaky battery. Doing so may cause a degradation
in the instrument functionality due to exposure to electrolyte
from the leaky battery.
• Subjecting the test lead to an excessive common-mode voltage
could cause the following issues:
(1) Unstable measured values
(2) Wire-break detection display ([−−−−])
Attaching ferrite cores around the test lead or placing the
instrument some distance away from the oor may have a
lightening the eect.
HIOKI BT3554F961-00HIOKI BT3554F961-00
To Next Page
Loading...
