18
Operating Precautions
Handling the test lead
CAUTION
Do not subject the pin type lead tip to force when it is in
contact with the battery under measurement at a tilted
angle.
NO
OK
Avoid subjecting the temperature probe tip to physical
shock, and avoid sharp bends in the lead. These may
damage the probe or break a wire.
IMPORTANT
Use only the Hioki-specied test lead. Using another test lead
may result in incorrect measurements due to loose connections
or other reasons. Besides, Hioki does not guarantee the accuracy
and proper operation.
Zero-adjustment board
WARNING
To prevent short-circuit accidents, do not place the
zero-adjustment board on top of a battery under
measurement.
HIOKI BT3554F961-00HIOKI BT3554F961-00
To Next Page
Loading...
