55
Adjusting the Zero Point (Zero Adjustment)
The instrument will automatically start obtaining correction
values.
When the zero adjustment has been completed, the instrument
will display the [0ADJ] segment and return the display to
measurement mode.
3 m
Ω
range 30 m
Ω
range
Zero adjustment
completed
300 m
Ω
range
3
Ω
range, voltage range
• Keep the test lead short-circuited until the zero adjustment is
completed.
• The zero adjustment will start even if the key is pressed after
the test lead has been short-circuited.
HIOKI BT3554F961-00HIOKI BT3554F961-00
To Next Page
Loading...
