212
Servicing
TURN OFF all the power switches.
2.2 Attaching Front Service Cover
(1) Attaching Piping Cover
(a) Put the piping cover 45° obliquely (Refer to Fig.1), then insert the hook of the piping cover into the edge of the oor
cover. (Refer to Fig. 1)
(b) Vertical the piping cover and x the front cover with the screw in Fig. 2.
Tool Phillips Screwdriver
Floor Cover
Hook
< Fig. 2>
Screw
< Fig. 1 >
(2) Attaching Front Cover
(a) Service cover shall be attached after attaching the piping cover.
(b) Fix the front cover with the screws.
(3) Attaching Service Cover
(a) Service cover shall be attached after attaching the front cover and upper cover. Insert the hooks of the service cover
into the square holes of the upper cover. (Refer to Fig. 3)
(b) Fix the front cover with the screws.
Hook
Hole
< Fig. 3>
Upper Cover
To Next Page
Loading...
Need help?
General
