284
Optional Function
PSW4 ( )
Setting Item (for setting item No.1)
is indicated.
Select a setting condition while setting items
are indicated. Press PSW3 (on the right side)
to increase the setting condition number.
*The setting condition for other functions can
also be selected in the same way.
Press PSW5 (on the left side) to decrease the
setting condition number.
Setting Item (for setting item No.2)
is indicated.
Setting Item (for setting item No.3)
is indicated.
Setting Item (for setting item No.4)
is indicated.
Setting Item (for setting item No.N-1)
is indicated.
Setting Item (for setting item No.N)
is indicated (N: the last item).
PSW2 ( )
PSW4 ( ) PSW2 ( )
PSW4 ( ) PSW2 ( )
PSW4 ( ) PSW2 ( )
PSW4 ( ) PSW2 ( )
PSW4 ( ) PSW2 ( )
PSW4 ( ) PSW2 ( )
(3) After selecting the control function No., press PSW1 for 3 seconds. The display will be back to the normal indication. The
selected contents are memorized in the outdoor unit PCB and “Function Setting” is completed. The memorized data is
maintained even when power supply is cut OFF.
To Next Page
Loading...
Need help?
General
