Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(IN)14-01-70]
Rev.1.1
INST(IN)14-01-70
(SVP procedure)
(19) Check storage system status and micro-versions of each MP.
<Micro-versions: (SVP03-05-10), Storage system status: (MU02-10)>
(20)-1 Execute the “On-line Micro-program Exchange” for the GUM. (MICRO03-10)
(20)-2 Execute the “On-line Micro-program Exchange” for the SSVP, Expander, CFM and so on. (MICRO03-10)
(21) Check storage system status. <Storage system status: (MU02-10)>
(22) Set IP Address. (*4) (INST(IN)14-02-40)
(SVP procedure)
(25) Delete error logs.
<Log delete: (SVP02-03-10), SIM Log Complete: (SVP02-08-10)> (*2)
(23) Is the SVP High
Reliability Kit installed?
(24)-1 Work to Do before Adding the SSVP Hardware. (INST(AD)10-01-10)
NOTE: However, the IP address used for access is not 126.255.254.15.
Please use IP address of the Additional SVP.
(24)-2 Procedure for Adding SSVP Hardware. (INST(AD)10-02-10)
(24)-3 Work to Do before Adding the SVP Hardware. (INST(AD)10-03-10)
(24)-4 Procedure for Adding the SVP Hardware. (INST(AD)10-04-10)
(24)-5 Setup of the Additional SVP. (INST(AD)10-05-10)
END
Yes
No
To Next Page
Loading...
