Hitachi GR2000 Series - Page 98

GR2000 Installation Guide
2-42 GR2K-GA-1002
Rev 6.03
2.5.1.1 LAN
Illustrated below are the LAN interface cables and connectors. All these interface
cables are to be procured by the customer.
10BASE-T
100BASE-TX
100BASE-FX
1000BASE-SX
1000BASE-LX
1000BASE-LH
25Mbps ATM NA25M-1* UTP category 3/4/5, 4-core/8-core, 2-pair
straight
-- 90 RJ-45
OC-12c/STM-4
(ATM)MMF
NAOC12-2M** Multimode optical fiber of 50/125 or 62.5/
125
µmcre/clad
0.5 500 SC 2-core/1-core
OC-12c/STM-4
(ATM)SMF
NAOC12-2S** Single-mode optical fiber of 10/125
µm
cre/clad
0.5 1.5k SC 2-core/1-core
* Used only in Japan.
** Pay attention to the tertiary group cable.
*** Connect NWVX-8 with the cables supplied separately. For details, refer to "Facility plan" and "Hardware
Operation Manual".
Table 2-10 Specifications of Interface Cables and Connectors (continued)
Device
RJ-45
UTP category 3/4/5, 4-core, 2-pair straight
RJ-45
Device
RJ-45
UTP category 5, 8-core, 4-pair straight
RJ-45
SC 2-core
Multimode or single-mode optical fiber of 1300 nm wavelength
Device
SC 2-core
SC 2-core
Multimode optical fiber of 850 or 1300 nm wavelength
Device
SC 2-core
SC 2-core
Multimode optical fiber of 850 nm wavelength or
Device
SC 2-core
single-mode optical fiber of 1300 nm wavelength
SC 2-core
Single-mode optical fiber of 1500 nm wavelength
Device
SC 2-core