3. SETUP
3-2
● Windows® 10 IoT Enterprise setup procedure
Perform the following procedure to set up Windows® 10 IoT Enterprise.
1. Turn on this equipment.
Windows starts running and setup is prepared.
Then, the message “Setup is installing devices. Please wait...” appears, indicating that
installation of the device driver is in progress.
• This processing may take several minutes. Please wait until it is completed.
After a while, the Windows® 10 IoT Enterprise setup window opens.
2. The Here's the legal stuff window opens.
• Check the contents, and then click the Accept button.
3. The Get going fast window opens.
• Click Customize settings.
• Select ON or OFF for settings as needed, and then click the Next button.
4. The Create an account for this PC window opens.
• Type a user name in Who's going to use this PC?.
• Type a password in Enter password in Make it secure.
• Retype the password in Re-enter password.
• Type a hint of password in Password hint.
• Click the Next button.
5. After the setup has been completed, the sign in operation is performed automatically.
The Windows® 10 IoT Enterprise setup procedure has been completed. Hereafter, make basic
OS settings according to the procedure described in “3.2 Configuring Basic Settings after OS
Setup”.
To Next Page
Loading...
Need help?
General
