8. MAINTENANCE OPERATIONS
8-19
8.4.4 RAS information display command (getrasinfo)
<Name>
getrasinfo - Displays the status of the equipment such as the status of the fan and the
temperature inside the chassis as well as the configuration information of the RAS software
<Syntax>
getrasinfo [/status | /setting] [/e file name]
<Feature>
The getrasinfo command displays the status of the equipment such as the status of the fan and
the temperature inside the chassis as well as the configuration information of the RAS software
at the command prompt. This command can also store the output in the specified file in the text
format.
The following options are available for this command. If neither the /status nor the /setting
option is used, the command displays both the information about the equipment and the settings
of the RAS software.
/status: Displays the status of the current equipment including the status of the fan and the
temperature inside the chassis.
/setting: The command displays the configuration information of the RAS software.
/e File name: The output is not displayed at the command prompt but instead stored in the
file specified by the file name in the text format.
Table 8-8 shows the information displayed by the getrasinfo command.
Table 8-7 Information Displayed by the getrasinfo Command
Ite
status
RAS software settings • Automatic shutdown setting
• Watchdog timer setting
• Self-Monitoring, Analysis and Reporting
Technology (SMART) setting
• Drive power-on hours monitoring setting
• Digital LEDs for Status indication setting
• Pop-up display setting
To Next Page
Loading...
Need help?
General
