2. OPERATION
2-5
2.6 DVD drive
NOTICE
● If you insert or access a CD or DVD, the system load may increase and
running applications may be affected. Do not insert or access an optical disc
during online operation (system operation).
● When you finish accessing a CD or DVD, eject the disc from the DVD drive.
If you leave the disc in the DVD drive, failure may result.
● If you keep the disc tray open, failure may result.
When you do not intend to use the DVD drive, keep the disc tray inside the
DVD drive.
● Do not use an unbalanced CD or DVD due to attached labels and so on; a disc
with cracks, scratches, or vertical deviation; or a disc with a non-standard
shape. If you do, an abnormal sound or vibration may be generated and failure
of the equipment may result.
2.6.1 Inserting a CD or DVD
1. Press the eject button gently to open the disc tray.
2. Set the CD or DVD on the disc tray with the label side facing up.
3. Push the disc tray to load the disc into the DVD drive.
Front View When the Disc Tray Is Open
Front View of the DVD Drive
Figure 2-1 DVD Drive (Front View)
Disc
Lamp
Eject button
Manual emergency
eject hole
To Next Page
Loading...
Need help?
General
