Hitachi HF-W2000 User Manual

9. TROUBLESHOOTING
9-33
9.6.2 Displaying a hardware status code
A hardware status code is displayed when an error occurs in the hardware during system
operation.
When the hardware status code is displayed, the RAS status lamp (red) in the status
indication LEDs is lit.
Table 9-6 Hardware Status Code and Cause/Action
Status code Cause Action
11 Rotation of the power supply fan is abnormal.
Read the description in “9.2.2 (1)”
and take action accordingly.
12 Rotation of the system fan is abnormal.
13 Rotation of the CPU fan is abnormal.
21 The temperature is abnormal.
Read the description in “9.2.2 (1)”
and take action accordingly.
31 Failure is predicted for the drive in drive bay 1.
We recommend you back up the
data and replace the drive.
32 Failure is predicted for the drive in drive bay 2.
41
(*1)
The drive bay1 is abnormal.
Read the description of "10.4.2"
and replace an HDD.
42
(*1)
The drive bay2 is abnormal.
4C
RAID status is unknown (RAS software could
not get the RAID status.)
Contact your system administrator
or maintenance personnel.
4D
(*2)
Media error is occurred on RAID.
Read the description of RAS
FEATURES MANUAL "2.8.2"
and take action accordingly.
(*1) This code is also displayed during rebuilding.
(*2) This code is not displayed in default setting. Read the description of RAS FEATURES MANUAL
“2.8.2” when you want to display this code.
< NOTE >
If a code other than one of the above is displayed, contact the system administrator
or maintenance personnel.

Hitachi HF-W2000 Specifications

General

Brand	Hitachi
Model	HF-W2000
Category	Desktop
Language	English