7. RESTORING THE FACTORY-SHIPPED CONDITION USING A RECOVERY DVD
7-8
<When you select Entire drive in the selection window for the drive restore option>
5. If you select Entire drive in the selection window for the drive restore option, the Input
the partition size window is displayed.
・The window shows the factory (default) setting for the partition size and the
minimum (MIN) and maximum (MAX) of the range of partition size values that can
be entered. Enter the partition size in GB (1 GB = 1,073,741,824 bytes), and click
Next.
・If you want to go back to the selection window for the drive restore option, click
Back.
If the entered value is out of range when you click Next, the following message is
displayed. Click OK and reenter the partition size.
To Next Page
Loading...
Need help?
General
