C-13
<Required actions>
・Do not change the factory default setting, "HF-W Power Settings", for the power plan.
Furthermore, do not change "Turn off hard disk after" setting from "0". If you want to
confirm the current setting for power plan and "Turn off hard disk after" setting, follow
the procedure below. (The display image assumes Windows® 7 but it is similar under
Windows® 10.)
Confirmation procedure of the current power plan settings
1. Open Control Panel and click System and Security.
2. Click Power Options.
3. Power Options window appears.
・Confirm that HF-W Power Settings radio button is selected under Preferred
plans.
To Next Page
