1. GETTING STARTED
1-19
Connecting to an outlet
Fully and securely insert the plug of the power cord of this equipment into an outlet with
a grounding pole that is properly grounded. (*1)
(*1) If you have no other choice than to use an outlet without a grounding pole that is
properly grounded, use 3-pole to 2-pole conversion adapter and connect the green
ground line from the adapter to the ground of the outlet. A user must verify the proper
functionality of the 3-pole to 2-pole conversion adapter before using it.
Make sure you use a power cor
with a
2-pole plug with a grounding pole.
< NOTE >
• The power cord that comes with the equipment is rated at the input voltage of
125 VAC. When using this equipment at over 125 VAC, prepare the power cord
fitting input voltage.
•
If you use a power cord clamp for preventing accidental disconnection, add an
extra length to the power cord around the connector when you secure the cord,
in order to allow the cord to be disconnected in an emergency. Alternatively,
install an emergency circuit breaker at the outlet side.
To Next Page
Loading...
Need help?
General
